- Overview
-
Cisco Nexus 9372PX-E Switch (N9K-C9372PX-E) is a min hardware revision of the Cisco Nexus 9372PX. Enhancements include hardware capability f IP-based endpoint group (EPG) classification in Cisco ACI mode.
Quick Specs
Figure 1 shows the appearance of the N9K-C9372PX-E.
Table 1 shows the Quick Specs.
Product Code
N9K-C9372PX-E
Pts
48 fixed 1/10GBASE-T and 6 QSFP+ pts
Fm fact
1 RU
Throughput (Tbps)
1.44
Suppted speeds
1/10 Gigabit Ethernet speeds
40 Gigabit Ethernet uplink pt
6 fixed QSFP+ pts
·Advanced QSFP+ optics enable connectivity using existing 10 Gigabit Ethernet fiber.
·The switch offers 25 MB of additional packet buffer space shared with all pts f me resilient operationsTypical power(AC & DC)
210W
Maximum power(AC & DC)
537W
Maximum number of longest prefix match (LPM) routes
128,000
CPU, SSD, and memy
Dual-ce 2.5-GHz x86 CPUs with 64-GB SSD drive and 16 GB of memy provide enhanced netwk perfmance.
Buffer (MB)
37
Operating System
NX-OS, ACI
Fans
4
Physical (H x W x D)
1.72 x 17.3 x 22.5 in. (4.4 x 43.9 x 57.1 cm)
Acoustics
48.5 dBA at 40% fan speed, 64.9 dBA at 70% fan speed, and 77.8 dB at 100% fan speed
Weight(without power supplies fans)
22.2 lb (10.1 kg)
·Typical and maximum power values are based on input drawn from the power circuit. The power supply value (f example, 650W AC power supply: N9K-PAC-650W) is based on the output rating to the inside of the switch.
·The actual maximum scale depends on the system fwarding modeProduct Details
Figure 2 shows the front panel of the N9K-C9372PX-E.
Note:
① Beacon (BCN), Status (STS), and Environment (ENV) LEDs
② 10-Gigabit SFP+ APIC-facing pts (48) suppting 1- and 10-Gigabit Ethernet
③ 40-Gigabit QSFP+ spine-facing pts (6) suppting 10- and 40-Gigabit Ethernet
Figure 3 shows the back panel of the N9K-C9372PX-E.
Note:
①
Power supply modules (1 2) (AC power supplies shown) with slots numbered 1 (left) and 2 (right)
②
Fan modules (4) with slots numbered from 1 (left) and 4 (right)
③
Beacon (BCN) and Status (STS) LEDs
④
Console pt (1)
⑤
Management pt (1)
The Accessies
Table 2 shows the recommended elements f the the N9K-C9372PX-E.
Categy
Model
Description
40G Transceiver and Cable Options
QSFP-H40G-ACU10M
Cisco QSFP to QSFP copper direct-attach 40GBASE-CR4 cable QSFP-H40G-ACU10M
QSFP-H40G-CU1M
Cisco QSFP to QSFP copper direct-attach 40GBASE-CR4 cable QSFP-H40G-CU1M
QSFP-H40G-CU3M
Cisco QSFP to QSFP copper direct-attach 40GBASE-CR4 cable QSFP-H40G-CU3M
QSFP-H40G-CU5M
Cisco QSFP to QSFP copper direct-attach 40GBASE-CR4 cable QSFP-H40G-CU5M
1/10G Transceiver and Cable Options
SFP-10G-SR
10GBASE-SR SFP Module
SFP-10G-LR
10GBASE-LR SFP+ Module f SMF 10 Gbps
GLC-LH-SMD
Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM
Compare to Similar Items
Table 3 shows the comparison of the N9K-C9372PX-E and N9K-C9372TX.
Product Code
N9K-C9372PX-E
N9K-C9372TX
Pts
48 fixed 1/10GBASE-T and 6 QSFP+ pts
48 fixed 1/10GBASE-T and 6 QSFP+ pts
Fm fact
1 RU
1 RU
Throughput (Tbps)
1.44
1.44
Suppted speeds
1/10 Gigabit Ethernet speeds
100 Megabit Ethernet and 1/10 Gigabit Ethernet speeds
Typical power(AC & DC)
210W
374.5W
Maximum power(AC & DC)
537W
694W
Maximum number of longest prefix match (LPM) routes
128,000
128,000
Acoustics
48.5 dBA at 40% fan speed, 64.9 dBA at 70% fan speed, and 77.8 dB at 100% fan speed
48.6 dBA at 40% fan speed, 65.2 dBA at 70% fan speed, and 76.5 dB at 100% fan speed
Weight(without power supplies fans)
22.2 lb (10.1 kg)
22.6 lb (10.25 kg)
Get Me Infmation
Do you have any question about the the N9K-C9372PX-E?
Contact us now via daqintech@aliyun.com .
- Specification
N9K-C9372PX-E Specification
Ports
48 fixed 1/10-Gbps SFP+ and 6 QSFP+ ports
Supported speeds
1/10 Gigabit Ethernet speeds
40 Gigabit Ethernet uplink port
6 fixed QSFP+ ports
Advanced QSFP+ optics enable connectivity using existing 10 Gigabit Ethernet fiber.
The switch offers 25 MB of additional packet buffer space shared with all ports for more resilient operations.
Power supplies (up to 2)
650W AC, 930W DC, or 1200W HVAC/HVDC
Typical power*(AC & DC)
210W
Maximum power* (AC & DC)
537W
Input voltage (AC)
100 to 240V
Input voltage (HVAC)
200 to 277V
Input voltage (DC)
-40V to -72V DC (min-max)
-48V to -60V DC (nominal)
Input voltage (HVDC)
–240 to –380V
Frequency (AC)
50 to 60 Hz
Fans
4
Physical (H x W x D)
1.72 x 17.3 x 22.5 in. (4.4 x 43.9 x 57.1 cm)
Acoustics
48.5 dBA at 40% fan speed, 64.9 dBA at 70% fan speed, and 77.8 dB at 100% fan speed
RoHS compliance
Yes
Maximum number of longest prefix match (LPM) routes
128,000*
Maximum number of IP host entries
208,000*
Maximum number of MAC address entries
96,000*
Number of multicast routes
● 32,000 (without virtual PortChannel [vPC])
● 32,000 (with vPC)
Number of Interior Gateway Management Protocol (IGMP) snooping groups
● 32,000 (without vPC)
● 32,000 (with vPC)
Maximum number of Cisco Nexus 2000 Series Fabric Extenders per switch
16
Number of access control list (ACL) entries
● 4000 ingress
● 1000 egress
Maximum number of VLANs
4096
Maximum number of Virtual Routing and Forwarding (VRF) instances
1000
Maximum number of links in a PortChannel
32
Maximum number of ECMP paths
64
Maximum number of PortChannels
528
Number of active SPAN sessions
4
Maximum number of Rapid per-VLAN Spanning Tree (RPVST) instances
507
Maximum number of Hot-Standby Router Protocol (HSRP) groups
490
Maximum number of Multiple Spanning Tree (MST) instances
64
Maximum number of VXLAN tunnel endpoints (VTEP)
256
Environmental Properties
Operating temperature
32 to 104°F (0 to 40°C)
Nonoperating (storage) temperature
-40 to 158°F (-40 to 70°C)
Humidity
5 to 95% (noncondensing)
Altitude
0 to 13,123 ft (0 to 4000m)
Weight
Cisco Nexus 9372PX/9372PX-E without power supplies or fans
22.2 lb (10.1 kg)
Cisco Nexus 9372TX/9372TX-E without power supplies or fans
22.6 lb (10.25 kg)
Safety and EMC
Regulatory compliance
Products should comply with CE Markings according to directives 2004/108/EC and 2006/95/EC
Safety
● UL 60950-1 Second Edition
● CAN/CSA-C22.2 No. 60950-1 Second Edition
● EN 60950-1 Second Edition
● IEC 60950-1 Second Edition
● AS/NZS 60950-1
● GB4943
EMC: Emissions
● 47CFR Part 15 (CFR 47) Class A
● AS/NZS CISPR22 Class A
● CISPR22 Class A
● EN55022 Class A
● ICES003 Class A
● VCCI Class A
● EN61000-3-2
● EN61000-3-3
● KN22 Class A
● CNS13438 Class A
EMC: Immunity
● EN55024
● CISPR24
● EN300386
● KN 61000-4 series
RoHS
The product is RoHS-6 compliant with exceptions for leaded-ball grid-array (BGA) balls and lead press-fit connectors
- Shipping & Payment
Delivery
Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.
Delivery Options Estimated Delivery Time DHL
2-4 business days Fedex
2-4 business days Hong Kong EMS
5-10 business days Hong Kong Air Parcel
10-20 business days By Sea
10-20 business days Notice:
Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:
Deliver to port:
daqintech.com is responsible for transporting goods to port. All subsequent customs and transportation fees are the
responsibility of the buyer. Router-switch will recommend trustworthy local freight forwarders to you.daqintech.com can facilitate the progress under buyer's permission and at buyer's expense.Deliver to door:
daqintech.com will quote all destination charge prior once we have confirmed order.
daqintech.com is responsible for transporting goods to door after you have made the payment.Payment Methods
Paypal Master Card Visa Discover American
ExpressJCB Wire Transfer eCheck WestUnion - Warranty
Warranty
100% Low Price Guarantee:
daqintech.com provides high-quality products at low wholesale prices
All items are ORIGINAL and GENUINE only:
Item conditions are all "New Sealed".
All items are fully tested with working conditions by Huawei certified engineer under customers' permission.100% Money Back Guarantee:
If your returns meet our relevent standards,you can contact our customer service team to exchange or return any product that you bought from us.
Professional Technical Support:
daqintech.com experienced technical team can provide support over the phone, by chat, by email or by remotely login.
Flexible Secure Payment & Shipment:
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Hardware Warranty Policy:
Original new sealed Huawei product: 1 Year.
The Support Contacts:
If your products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Standard Services
Branch Offices : Hong Kong | USA | UKHong Kong WarehouseShenzhen WarehouseQuality CheckingPackagingShippingRecently Viewed Products
-
N9K-C93180YC-EX
US$8,268.75 -
N9K-C93108TC-EX
US$8,741.25 -
N9K-C9372PX-E
US$8,820.00 -
N9K-C9372TX
US$11,466.00 -
N9K-C92160YC-X
US$7,350.00 -
N9K-C9372PX
US$11,466.00